Product Description

Main Features for HC-B043H PPP/PRP/Plasma Gel Maker Bio Filler Machine PPP Autologous Plasma Gel Filler Collagen Transplantation Incubator

 PPP autologous collagen transplantation is extract plasma from litigant's blood, and then made plasma liquid to gel , then inject into body.

PPP filling technology is made the plasma that extract from litigant's blood into gel, and then inject into body. During the process, our model HC-B043H is the important equipment to made blood plasma into autologous collagen, HC-B043H adopt advanced cooling and heat system, it can control the temperature accurately, the autologous collagen made by HC-B043H replaced the high cost filler. With good features of no toxic and no side effect, at the same time, can extract PRP (Platelet Rich Plasma) inject into dermis, promote skin recovery, help to eliminate wrinkles, enhance the face, shrink pores , tender skin etc.

Application of HC-B043H PPP/PRP/Plasma Gel Maker Bio Filler Machine PPP Autologous Plasma Gel Filler Collagen Transplantation Incubator

1. Enhance shallow contours

2. Fill all kinds of wrinkles and add volume and smooth out the deep creases and wrinkles in the face

3. Improve the profile of body part

4. Improve the appearance of recessed scars

5. Nose re-shaping

6. Modify the chin outline

7. Plumping thin lips and Nose reshaping

8. Reduce fine lines around the neck

9. Reduce or remove eye-bags

10. Solve the check depression and augment cheeks to enhance youthfulness

Advantages of HC-B043H PPP/PRP/Plasma Gel Maker Bio Filler Machine PPP Autologous Plasma Gel Filler Collagen Transplantation Incubator

1.Ideal Effect: the autologous collagen can promote the cells growths, keep the skin elasticity.

2.Long Time Maintaining: Inject once time maintains 4-7 months.

3.Low Cost: Extract from own body and save much cost.

4.Safety: its extract from body, its very safe.

5.Get perfect quality Plasma Bio-Filler in minutes.

Step 1:Tubes prepare

Step 2:Blood collection

Step 3:Blood separation

Step 4:Get PPP and PRP

Step 5:PPP collection

Step 6:Heat PPP at 70 ºC for 5 mins, then heat at 90ºC for 10 mins.

Step 7: Put PPP into cooling holes for 5 mins. (set temperature at 37ºC), then the PPP gel make finished.

Step 8: Inject the PPP gel into the needed place.

Note for HC-B043H PPP/PRP/Plasma Gel Maker Bio Filler Machine PPP Autologous Plasma Gel Filler Collagen Transplantation Incubator:

1. This machine only for PPP&PRP gel make.

2. During operation , don't need to add anything else (such as PRP).

3. Suggest don't use PRP to make Gel, because its easy to inactivity. But you could mix the PRP with PPP gel.

Pictures for HC-B043H PPP/PRP/Plasma Gel Maker Bio Filler Machine PPP Autologous Plasma Gel Filler Collagen Transplantation Incubator